Hochdruckreaktor, Autoklav, Magnetrührdurchführung, Hydrierung


High pressure reactor vivor

The reactor vivor makes do with a single fitting, but it is quite something, as it combines a shut-off valve, pressure gauge and bursting disc safety device at the same time. A dip tube on the autoclave lid completes the small autoclave.


  • Nominal volume ml: 60, 100
  • Working volume ml: 20-40, 40-60
  • Working pressure bar: 200, 280, 480
  • Working temperature °C: 200, 250, 300
  • Material WNr. 1.4435 at 200 bar - WNr. 2.4602 at 250 bar - WNr. 1.4980 at 280 bar
  • Union nut as lock M48 x1.5 mm, width across flats SW55
  • Double sealed: O-ring and medium seal metal to metal (cutting ring).
  • Pressure relief valve or metering valve for gas supply and pressure relief
  • Pressure gauge ø 64 mm in chemical version
  • Bursting disc holder equipped with bursting disc
  • Immersion tube for temperature sensor below cover
  • Temperature sensor Pt100 or type K

Variants/special features

  • Basic model: Central fitting with 3 connections + 1 x reactor cover or 4 connections starting directly from the reactor cover.
  • Pressure stages: 200, 250 or 300 bar depending on the choice of material.
  • Temperature stages °C: 200, 250, 300 depending on the choice of material.
  • Material for wetted parts WNr.: 1.4435 (AISI 316L), 2.4602 (HC22) and 1.4980 (AISI 660) as standard. Versions in Hastelloy C276, B3 or titanium size 2 on request.
  • The autoclave vessel is double-sealed: once in the upper area by an O-ring made of Viton, EPDM or Kalrez and at the bottom via a metal-to-metal medium seal (cutting ring).
  • Temperature sensor Pt100, type K or type N in the immersion tube for measuring the medium temperature (not included in delivery).

Compact and individually heatable

Compact and inexpensive, vivor is a popular choice for versatile applications in the laboratory. Two versions are offered: a centred fitting with 4 outlets or four individual connections on the reactor lid. The reactor vivor can be used with an oil thermostat or in combination with a heating plate with stirrer drive and internal magnetic stir bar.

Article No Vol. mlPres PS barTemp. TS C°Pres PA barTemp. PA C°Mat. WNr.Sensor / HeatingDrive / VersionL x W x H mm
132244 602502252002001.4435Type KSitec special valve85x110x301
130080 602502252002001.4435without2 needle valves120x129x269
120263 603502752802502.4602Type KSitec special valve92x115x300
130088 603502752802502.4602without2 needle valves124x156x288
120262 606003254803001.4980Type KSitec special valve85x111x301
132248 1002502252002001.4435Type KSitec special valve85x110x340
130085 1002502252002001.4435without2 needle valves120x129x308
132250 1003502752802502.4602Type KSitec special valve92x115x339
130092 1003502752802502.4602without2 needle valves124x156x327
132252 1006003254803001.4980Type KSitec special valve85x111x340
* For a direct quote request, click the corresponding article number.